technical feature:
1. Built on the 35mm rail, LAN1 is a dual-port RJ 45 with switch function, this port connects PLC; LAN2 is single port RJ 45, can be connected to touch pad or upper computer system; WiFi external high gain antenna can be connected to upper computer; ENET-MIT-S external 24VDC power supply.
2. Integrated WiFi function, support AP mode, STA mode and AP + STA mode;
3. PLC programming, data acquisition, data exchange and cross-network segment access through WiFi;
4. Integrate WEB server to set device parameters and run diagnosis through the webpage; it can also be configured through BCDevice tool; it can be configured from LAN1 / LAN2 interface or WiFi.
5. Implement Mitsubishi internal protocol MELSOFT connection, which can be apped into LAN2 / WiFi ModbusTCP and MC (3E frame) server, and realize ModbusTCP and MC (3E frame) protocol connection without configured Mitsubishi PLC.
6. Implement the NAT function to map the IP address and port number of the PLC connected by the LAN1 port to any IP and port number of LAN2 / WiFi.
7. LAN2 / WiFi can support ModbusTCP server function, which can map MELSOFT connected PLC into ModbusTCP server with LAN2 port; the mapping relationship between internal soft components of Modbus and Mitsubishi PLC can be edited freely edited.
8. LAN2 / WiFi can support MC (3E frame) protocol server function, which can map MELSOFT connected PLC into LAN2 / WiFi MC (3E frame) protocol server, facilitating OPC to use Mitsubishi Ethernet drive function.
9. LAN2 / WiFi can support up to 32 upper computer access.
10. SCADA (upper configuration software) supporting OPC channel communicates with PLC in OPC mode.
11. Support the user side to achieve firmware update through Ethernet, provide free integrated more functional firmware, one hardware purchase, permanent upgrade.
Typical applications:
technical parameter:
product model |
ENET-MIT-S |
description |
Mitsubishi Q network port PLC Ethernet communication processor |
pigment |
Metal black |
situation display |
Pwr,LAN1,LAN2,WiFi |
WiFi interface (connected upper) |
802.11 b/g/n 2.4G-2.5G |
LAN1 interface (connected to PLC) |
The Link / Active indicator light, with automatic polarity crossing |
LAN2 interface (connect to the upper position) |
The Link / Active indicator light, with automatic polarity crossing |
programming software |
GX Work2 |
Diagnostic and parameter settings tool |
IE browser, default 192.168.1.188, BCDevice |
power supply mode Voltage type |
External connection 24V 24VDC/100mA |
working temperature |
0~60'C |
Working humidity |
95% Non-coagulation |
electromagnetic compatibility |
2014/30/EU |
attestation |
CE attestation |
Dimensions (L * W * H) |
115*27*75mm |
weight |
150g |