Module function
1. Installed on the 35mm guide rail, the COM1 port is directly connected to the MD8 programming communication circle port of the DVP, and a COM2 port is expanded for touch screen communication. ENET-DVP can obtain power directly from the PLC programming communication port or from an external 24VDC power supply.
2. Integrate WEB server, set device parameters and operation diagnosis through the web page, and set the login protection password to prevent tampering with configuration data.
3, automatically match PLC and HMI serial parameters without additional configuration.
4. Realize Ethernet communication with Delta programming software WPLSoft and ISPSoft, read out / write (including write function in RUN) / comparison through Ethernet, programmable controller operation monitoring and other functions.
5. Support Delta Ethernet protocol communication. You can read / write the soft component data of the programmable controller through the upper computer system, and select the Delta Ethernet drive through the upper computer software (configuration king, KepWare OPC server, etc.) for convenient and quick access.
6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, and the Modbus data area corresponding to the soft component address of Delta DVP.
7, the specific ENETTCP / IP protocol is directly mapped to the computer serial port, supporting the upper software (programming software FPWIN GR, configuration, king, MCGS, force control, IFIX, INTOUCH, KepWare OPC server, etc.) convenient and quick access.
8. Using ModbusTCP communication protocol or port mapping, it can realize high-level language programming (such as VB, VC, C #, etc.), realize data communication with Delta DVP, and facilitate the development of production management system.
9. SCADA (OPC software) communicates with PLC in OPC mode.
10. The connection mode of WPLSoft, ISPSoft, ENETTCP transtransmission and ModbusTCP can be realized, allowing 6 PCs to collect PLC data at the same time, and the connection protocol can be used arbitrarily.
11. Support the user side to achieve firmware update through Ethernet, provide free integrated more functional firmware, one hardware purchase, permanent upgrade.
Module installation (with 0.6 m communication line)
Typical application
technical parameter
product model |
ENET-DVP |
description |
Delta DVP series PLC Ethernet communication processor |
pigment |
Metal black |
situation display |
Pwr,COM1,COM2,Link |
Ethernet interface interface type transmission speed Protocol support TCP linker number |
IEEE 802.3 compatible, Link / Active indicator light, line order adaptive, support Auto-MDIX RJ 45 female socket 10/100Mbps ENETTCP、ENETUDP 6 |
X1 interface (connected to PLC) interface type transmission speed Protocol support |
RS232 The MD8 communication master port 9.6K、19.2K、38.4K、115.2Kbps Delta PLC communication protocol |
X2 interface (connected with HMI) interface type transmission speed Protocol support |
RS232 The MD8 communication master port 9.6K、19.2K、38.4K、115.2Kbps Delta PLC communication protocol |
Programming software and configuration software OPC software |
WPLSoft Kunlun state, configuration king, three-dimensional force control, etc KepWare OPC |
Diagnostic and parameter settings |
IE Browser, default 192.168.1.178, BCDevice |
power supply mode Voltage type |
DVP communication port directly take power (communication cable) or external 24VDC 24VDC/100mA |
working temperature |
0~60℃ |
Working humidity |
90% Non-condensation |
way to install |
35mm guide rail installation |
electromagnetic compatibility |
2014/30/EU |
Anti-vibration |
4.5mm/30Hz/10Min |
ESD |
6KV |
Factory aging |
The 60 degree aging box operated for 168 hours and was power off 500 million times |
Communication stability |
Continuous 30 days of uninterrupted communication with PLC, 130 million communication 0 error |
attestation |
CE attestation |
Dimensions (L * W * H) |
90*24*65mm |
weight |
100g |