technical feature:

1. Built on 35mm rail, LAN1 is 4 * RJ 45 with switch function, this port connects PLC, upper computer or touch screen; LAN2 is single port RJ 45, can connect touch pad or upper computer system across network segments; WiFi external high gain antenna can be connected to upper computer; ENET-FX 5 U-S external 24VDC power supply.

2. Integrate the WiFi function to support AP mode, STA mode and AP + STA mode.

3. PLC programming, data acquisition, data exchange, and cross-network segment access can be conducted through WiFi.

4. Integrate WEB server to set device parameters and run diagnosis through the webpage; it can also be configured through BCDevice tool; it can be configured from any LAN1 / LAN2 interface or WiFi.

5. Implement the NAT function, which can forward TCP and UDP protocol messages across network segments, and expand network segments to access PLC data.

6, support ModbusTCP server function, FX 5 U can be mapping into ModbusTCP server, Modbus and Mitsubishi PLC internal soft components mapping relationship can be freely edited.

7. Support SLMP (MC3E) server function, can map FX 5 U into SLMP (MC3E) server, and facilitate OPC to use Mitsubishi Ethernet drive function.

8. Support ModbusTCP master station function, and can read ModbusTCP data from station equipment (instrument, gateway, etc.) to FX5UPLC, without PLC programming.

9. Integrated data exchange function, support data exchange with Siemens PLC, support data exchange with ModbusTCP server, and support wired / wireless data exchange between multiple FX 5 Us.

10. LAN1 / LAN2 / WiFi interface can support up to 32 host machine access.

11. SCADA (upper configuration software) supporting OPC channel communicates with PLC in OPC mode.

12. Support the user side to achieve firmware update through Ethernet, provide free integrated more functional firmware, one hardware purchase, permanent upgrade.

Typical applications: