ENETS7200 Function:

1, support multi-master station communication, the expansion port can be connected to the touch screen or other main station.

2. The device can be set and run through the WEB server or configuration diagnostic tool BCDevice.

3, the baud rate 9.6Kbps~187.5Kbps adaptive.

4. Directly installed on the PPI communication port of the PLC or the EM277, without any external power supply.

5. Support Siemens S7 Ethernet communication driver, including MicroWIN, and support WinCC to directly connect to S7-200 in TCP / IP mode.

6. Users can adopt high-level language programming (such as VB, VC, C #, etc.) according to the ENETS7 protocol to realize data communication with S7-200 and facilitate the development of production management system.

7. Provide the ENETS7 OPC server for free, and the SCADA supporting OPC channel to communicate with PLC in OPC mode.

8, integrated ModbusTCP server, Modbus data area can be automatically or edited to S7-200 register.

9. Implement S 7 TCP connection and ModbusTCP communication at the same time, and support up to 32 upper computer connections.

10. Support the user side to achieve firmware update through Ethernet, one purchase, permanent upgrade.

ENETS7200 Module installation: