Technical features:

1. Installed on a 35mm rail, LAN1 is a dual-port RJ45, with switch function, this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a touch screen or host computer system; ENET is powered by an external 24VDC power supply.

2. Integrated WEB server, through the web page can set equipment parameters and run diagnosis; It can also be configured via the BCDevice tool; It can be configured arbitrarily from LAN1 or LAN2 ports.

3. Implement the NAT function, map the IP address and port number of the PLC connected to the LAN1 port to any IP and port number of the LAN2 port.

4. SmartIE series touch screen can be connected to S7-1200, S7-1500 and other PLCs.

5. The LAN2 port can support the ModbusTCP server function, and the PLC connected to the LAN1 port can be mapped to the ModbusTCP server of the LAN2 port.

6. The LAN2 port can support the BCNetS7 protocol server function, and the PLC connected to the LAN1 port can be mapped to the BCNetS7 protocol server of the LAN2 port, which is convenient for using the BCNetS7 function.

7. Support up to 32 LAN2/LAN1 server/client concurrency models, and LAN2 port can support up to 32 host computer access.

8. Using BCNetS7 protocol or ModbusTCP, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with PLC, and facilitate the development of production management system.

9. SCADA (superstructure software) that supports OPC channel communicates with PLC in OPC mode.

10. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade it permanently.