ENET-FX5U features:

1. Installed on a 35mm rail, LAN1 is a dual-port RJ45, with switch function, this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a touch screen or host computer system; The ENET-FX5U is powered by an external 24VDC power supply.

2. Integrated WEB server, through the web page can set equipment parameters and run diagnosis; It can also be configured via the BCDevice tool; It can be configured arbitrarily from LAN1 or LAN2 ports.

3. Map Mitsubishi FX5U to ModbusTCP and SLMP (MC3E) server at LAN2 port, which can realize ModbusTCP and SLMP (MC3E frame) connection without Mitsubishi PLC configuration.

4. Realize NAT function, forward TCP and UDP protocol messages across network segments, and realize expanded network segments to access PLC data.

5. LAN2 supports ModbusTCP server function, which can map FX5U to LAN2's ModbusTCP server, and the mapping relationship between Modbus and Mitsubishi PLC internal software components can be edited freely.

6. LAN2 supports SLMP (MC3E) server function, which can map FX5U to SLMP (MC3E) server of LAN2, which is convenient for OPC to use Mitsubishi Ethernet drive function.

7. The LAN2 port can support up to 32 upper computer access.

8. Using Mitsubishi SLMP (MC3E) protocol or ModbusTCP, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with PLC, and facilitate the development of production management system.

9. SCADA (superstructure software) that supports OPC channel communicates with PLC in OPC mode.

10. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade it permanently.