ENET-MIT features:

1. Installed on a 35mm rail, LAN1 is a dual-port RJ45, with switch function, this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a touchpad or host computer system; ENET-MIT is powered by an external 24VDC power supply.

2. Integrated WEB server, through the web page can set equipment parameters and run diagnosis; It can also be configured via the BCDevice tool; It can be configured arbitrarily from LAN1 or LAN2 ports.

3. Realize Mitsubishi's internal protocol MELSOFT connection, which can map the MELSOFT protocol to the ModbusTCP and MC (3E frame) server of LAN2 port, and realize the connection of ModbusTCP and MC (3E frame) protocol without configuring Mitsubishi PLC.

4. Implement the NAT function, and map the IP address and port number of the PLC connected to the LAN1 port to any IP and port number of the LAN2 port.

5. The LAN2 port can support the ModbusTCP server function, and the PLC connected by MELSOFT can be mapped to the ModbusTCP server of the LAN2 port; The mapping relationship between Modbus and Mitsubishi PLC internal software components can be freely edited.

6. LAN2 PORT CAN SUPPORT MC (3E FRAME) PROTOCOL SERVER FUNCTION, AND THE PLC CONNECTED TO MELSOFT CAN BE MAPPED TO THE MC (3E FRAME) PROTOCOL SERVER OF LAN2 PORT, WHICH IS CONVENIENT FOR OPC TO USE MITSUBISHI ETHERNET DRIVE FUNCTION.

7. The LAN2 port can support up to 32 upper computer access.

8. Using Mitsubishi MC (3E frame) protocol or ModbusTCP, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with PLC, and facilitate the development of production management system.

9. SCADA (superstructure software) that supports OPC channel communicates with PLC in OPC mode.

10. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade it permanently.