Module features

1. Installed on a 35mm guide rail, the COM1 port is directly connected to the MD8 programming communication round port of DVP, and a COM2 port is extended for touch screen communication. ENET-DVP can directly obtain power from the PLC programming communication port, and can also be connected to an external 24VDC power supply.

2. Integrate WEB server, set device parameters and run diagnosis through web page, and set login protection password to prevent tampering with configuration data.

3. Automatically match PLC and HMI serial parameters, no additional configuration is required.

4. Realize Ethernet communication with Delta's programming software WPLSoft and ISPSoft, and carry out program read/write (including RUN write function)/comparison through Ethernet, programmable controller operation monitoring and other functions.

5. Support Delta Ethernet protocol communication, read out/write software component data to the programmable controller through the host computer system, and select the Delta Ethernet driver through the host computer software (configuration king, KepWare OPC server, etc.), which is convenient and quick to access.

6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area corresponds to Delta's DVP software component address.

7. The specific ENET TCP/IP protocol is directly mapped to the serial port of the computer, and the upper-level software (programming software FPWIN GR, configuration king, MCGS, force control, IFIX, INTOUCH, KepWare OPC server, etc.) is convenient and quick to access.

8. Using ModbusTCP communication protocol or port mapping, it can realize programming in high-level languages (such as VB, VC, C#, etc.), realize data communication with Delta DVP, and facilitate the development of production management system.

9. SCADA (superstructure software) that supports OPC channel communicates with PLC in OPC mode.

10. WPLSoft, ISPSoft, ENET TCP transparent transmission and ModbusTCP connection mode can be realized, allowing 6 PCs to collect PLC data at the same time, and the connection protocol can be used arbitrarily.

11. Support the user side to achieve firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware once, and upgrade permanently.