ENET-FB Features:

1. Installed on the 35mm guide rail, the COM1 port is directly connected to the PLC programming communication port, and a COM2 port is extended for touch screen communication. ENET-FB can obtain power directly from the PLC programming communication port, or it can be connected to an external 24VDC power supply.

2. Integrate WEB server, set device parameters and run diagnosis through web page, and set login protection password to prevent tampering with configuration data.

3. The communication parameters of Yonghong PLC programming port are self-adapting, and no additional settings are required.

4. Realize the Ethernet communication function of Yonghong PLC programming software WinProladder, and realize the functions of program readout/write (including RUN writing function)/comparison, programmable controller operation monitoring and other functions through Ethernet.

5. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area is automatically mapped to Yonghong PLC's data area.

6. ENETTCP transparent transmission mode can be adopted, and it supports convenient and fast access to upper-level software (programming software WinProladder, Configuration King, MCGS, Force Control, IFIX, INTOUCH, KepWare OPC server, etc.).

7. Using ModbusTCP mode, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Yonghong PLC, and facilitate the development of production management system.

8. SCADA (superordinate configuration software) that supports OPC channel communicates with Yonghong PLC in OPC mode.

9. It can realize the connection of programming software WinProladder, ModbusTCP and ENETTCP transparent transmission, allowing 6 PCs to collect PLC data at the same time, and the connection protocol can be used arbitrarily.

10. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade it permanently.