ENET-DVP-S function

1. Installed on a 35mm guide rail, no external power supply is required. The COM1 port is connected to the round port of the PLC, and the COM2 expansion port is used for touch screen communication.

2. Through the WEB server or the configuration diagnosis tool BCDevice, the device can be set parameters and run diagnostics.

3. Automatically identify the PLC model, automatically match the serial parameters of PLC and HMI, no additional configuration is required.

4. Integrated WiF function, support AP mode, STA mode and AP STA mode

5. PLC programming data acquisition can be carried out through WiFi.

6. Realize Ethernet communication with Delta's programming software WPLSoft and ISPSoft.

7. Support Delta Ethernet protocol communication, support host computer software (configuration king, MCGS, force control, KepWare OPC server, etc.) access.

8. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area automatically mapped to PLC data area.

9. ModbusTCP can be used to realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with PLC, and facilitate the development of production management system.

10. SCADA (upper-level configuration software) that supports OPC channel communicates with PLC in OPC mode.

11. WPLSoft, ISPSoft, and ModbusTCP connection modes can be realized at the same time, and 32 host computers can be connected.

12. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.