ENET-XJ features:

1. Installed on the 35mm guide rail, the COM1 port is directly connected to the MD8 programming communication round port of XJ, and a COM2 port is extended for touch screen communication. The ENET-XJ can be directly powered by the PLC programming communication port, or can be connected to an external 24VDC power supply.

2. Integrate WEB server, set device parameters and run diagnosis through web page, and set login protection password to prevent tampering with configuration data.

3. Automatically match PLC and HMI serial parameters, no additional configuration is required.

4. Realize Ethernet communication with Xinjie programming software XCPPro, and carry out program read/write (including RUN writing function)/comparison through Ethernet, programmable controller operation monitoring and other functions.

5. Support Xinjie Ethernet protocol communication, the readout/write of software component data can be carried out by the host computer system, and the Xinjie Ethernet driver can be selected through the host computer software, which is convenient and quick to access.

6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area corresponds to the soft component address of Xinjie PLC.

7. Using ModbusTCP communication protocol or port mapping, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Xinjie PLC, and facilitate the development of production management system.

8. XCPPro, ENETTCP transparent transmission and ModbusTCP connection modes can be realized, allowing 6 PCs to collect PLC data at the same time, and the connection protocol can be used arbitrarily.

9. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade permanently.