ENET-NAT-S function

1. Installed on a 35mm rail, LAN1 is a four-port RJ45, with switch function, this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a host computer; WiFi external high-gain antenna, can be connected to the host computer. ENET-NAT needs to be powered by an external 24VDC power supply.

2. Integrated WiFi function, support AP mode, STA mode and AP STA mode.

3. PLC programming and data acquisition can be carried out through WiFi.

4. Integrate WEB server, set equipment parameters and run diagnosis through web page; It can also be configured via the BCDevice tool; It can be configured arbitrarily from LAN1, LAN2, or WiFi.

5. To realize NAT function, the module can be configured with 4 groups of forwarding ports, and each group of forwarding ports can be connected by multiple TCP or UDP;

6. The host computer can access the devices connected to the LAN1 interface through LAN2 or WiFi, and can convert IP across network segments.

7. It can support up to 32 host computer connections.

8. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.