ENET-4NAT Features:

1. Installed on a 35mm rail, LAN1 is a four-port RJ45, with switch function, this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a host computer; WiFi external high-gain antenna, can be connected to the host computer; ENET-4NAT needs to be powered by an external 24VDC power supply;
2. Support NAT mapping and IP address cross-network segment access for 4 PLCs;
3. Integrated WiFi function, support AP mode, STA mode and AP STA mode;
4. PLC programming and data acquisition can be carried out through WiFi;
5. Integrated WEB server, through the web page to set equipment parameters and run diagnosis; It can also be configured via the BCDevice tool; Configurable from LAN1, LAN2 or WiFi at will;
6. The host computer can access the devices connected to the LAN1 interface through LAN2 or WiFi, and can convert IP across network segments;
7. It can support up to 32 upper computer connections;
8. Support the user side to achieve firmware update through Ethernet, one-time purchase, permanent upgrade.