ENET-KYO Features:

1. Installed on the 35mm guide rail, the COM1 port is directly connected to the Koyo PLC programming communication port (RJ11), and a COM2 port is extended for touch screen communication. ENET-KYO can obtain power directly from the PLC programming communication port, and can also be connected to an external 24VDC power supply.

2. Integrate WEB server, set device parameters and run diagnosis through web page, and set login protection password to prevent tampering with configuration data.

3. Support Koyo K protocol, CCM2 HEX protocol and CCM2 ASCII protocol, and automatically identify the protocol type and communication parameters of the PLC programming port without additional configuration.

4. Realize the Ethernet communication function of SOLAR PCL programming software DirectSOFT, and realize the functions of program read/write (including RUN writing function)/comparison, programmable controller operation monitoring and other functions through Ethernet.

5. Support SOLAR ECOM/UDP Ethernet protocol communication, and support host computer software (KepWare OPC server, etc.) to access with SOLAR Ethernet drive.

6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC15, FC6, FC16, Modbus data area is automatically mapped to the data area of Koyo PLC.

7. Using ModbusTCP or ECOM/UDP protocol, it can realize high-level language programming (such as VB, VC, C#, etc.), realize data communication with Koyo PLC, and facilitate the development of production management system.

8. SCADA (superordinate configuration software) that supports OPC channel communicates with Solar's PLC in OPC mode.

9. It can realize programming software DirectSOFT connection, ModbusTCP and ECOM/UDP connection, allowing 6 PCs to collect PLC data at the same time, and the connection protocol can be used arbitrarily.

10. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware at one time, and upgrade it permanently.