ENET-FX features:

1. Installed on a 35mm guide rail, no external power supply is required. The COM1 port is connected to the FX's S8 programming communication port, and the COM2 expansion port is used for touch screen communication.
2. Through the WEB server or the configuration diagnosis tool BCDevice, the device can be set parameters and run diagnostics.
3. The baud rate of the FX programming communication port is automatically adjusted, which can adapt to the needs of large data volume communication.
4. Support Ethernet communication of MELSOFT products (GX Works2, GX Developer, etc.).
5. Support MC Ethernet protocol (MELSEC Communication Protocol) communication of the upper computer, and support access to the upper software (configuration king, MCGS, force control, IFIX, INTOUCH, KepWare OPC server, etc.).
6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area is automatically mapped to FX data area.
7. Support TCP/IP transparent transmission protocol communication.
8. Using MC communication protocol, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Mitsubishi FX, and facilitate the development of production management system.
9. SCADA (superordinate configuration software) that supports OPC channel communicates with FX in OPC mode.
10. It can realize MELSOFT connection, MC protocol connection and ModbusTCP connection mode at the same time. Support the connection of 6 host computers.
11. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.