ENET-FX-S function

1. Installed on a 35mm guide rail, no external power supply is required. The COM1 port is connected to the FX's S8 programming communication port, and the COM2 expansion port is used for touch screen communication.

2. The device can be parameterized and run through the WEB server or the configuration diagnosis tool Device.

3. The baud rate of the FX programming communication port is automatically adjusted, which can adapt to the needs of large data volume communication.

4. Integrated WiFi function, support AP mode, STA mode and AP STA mode.

5. PLC programming and data acquisition can be carried out through WiFi.

6. Support Ethernet communication of MELSOFT products (GX Works2, GX Developer, etc.).

7. Support MC Ethernet protocol (MELSEC Communication Protocol) communication of the host computer, and support access to the host software (configuration king, MCGS, force control, IFIX, INTOUCH, KepWare OPC server, etc.).

8. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area automatically mapped to FX data area.

9. Using MC communication protocol, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Mitsubishi FX, and facilitate the development of production management system.

10. SCADA (superstructure software) that supports OPC channel communicates with FX in OPC mode.

11. It can realize MELSOFT connection, MC protocol connection and ModbusTCP connection mode at the same time, and support the connection of 32 host computers.

12. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.