ENET-S7200 features:

1. Support multi-master communication, and the expansion port can be connected to the touch screen or other master stations.

2. The device can be set and run the diagnosis through the WEB server or the configuration diagnosis tool BCDevice.

3. Baud rate 9.6Kbps~187.5Kbps self-adaptive.

4. It is directly installed on the PPI communication port of PLC or EM277 communication port, and no external power supply is required.

5. Support Siemens S7 Ethernet communication driver, including MicroWIN, and support WinCC to directly connect to S7-200 in TCP/IP mode.

6. Users can use high-level language programming (such as VB, VC, C#, etc.) according to ENET S7 protocol to realize data communication with S7-200, which is convenient for the development of production management system.

7. ENET S7 OPC server is provided free of charge, and the SCADA that supports OPC channel communicates with PLC in OPC mode.

8. Integrated ModbusTCP server, Modbus data area can be mapped to S7-200 registers automatically or edited.

9. S7TCP connection and ModbusTCP communication can be realized at the same time, and up to 32 upper computer connections can be supported.

10. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.