ENET-S7300 features:

1. Support multi-master communication, and the expansion port can be connected to the touch screen or other master stations.

2. The device can be set and run the diagnosis through the WEB server or the configuration diagnosis tool BCDevice.

3. Baud rate 9.6Kbps~6Mbps self-adaptive.

4. It is directly installed on the PPI/MPI/PROFIBUS communication port of the PLC, without external power supply.

5. Support Siemens S7 Ethernet communication driver, including MicroWIN, STEP7, Botu, WinCC, etc.

6. Users can use high-level language programming (such as VB, VC, C#, etc.) according to ENETS7 protocol to realize data communication with S7-200/300/400, which is convenient for the development of production management system.

7. ENETS7 OPC server is provided free of charge, and the SCADA that supports OPC channel communicates with PLC in OPC mode.

8. Integrated ModbusTCP server, Modbus data area can be automatically or edited to map to S7-200/300/400 registers.

9. S7TCP connection and ModbusTCP communication can be realized at the same time, and up to 32 upper computer connections can be supported.

10. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.