ENET-S7200-S features

1. Support multi-master communication, and the expansion port can be connected to the touch screen or other master stations.

2. Set the parameters and run the diagnosis of the device through the WEB server or the configuration diagnosis tool BCDevice.

3. Baud rate 9.6Kbps~187.5Kbps self-adaptive.

4. Installed on the 35mm guide rail, connected to the PPI communication port of the PLC or the communication port of EM277 through the DP cable, and the external 24VDC power supply is required.

5. Integrated WiFi function, support AP mode, STA mode and AP STA mode.

6. PLC programming, data acquisition and data exchange can be carried out through WiFi.

7. Support the function of communication with the Ethernet interface of S7-200, S7-200SMART, S7-1200/1500, S7-300 and S7-400 and the function of ModbusTCP master and slave.

8. Support S7 Ethernet communication driver, including MicroWIN, support WinCC to directly connect to S7-200 in TCP/IP mode.

9. Users can use high-level language programming (such as VB, VC, C#, etc.) according to the ENETS7 protocol to realize data communication with S7-200, which is convenient for the development of production management system.

10. ENETS7 OPC server is provided free of charge, and the SCADA that supports the OPC channel communicates with the PLC in OPC mode.

11. Integrated ModbusTCP server, Modbus data area can be mapped to S7-200 registers automatically or edited.

12. S7TCP connection and ModbusTCP communication can be realized at the same time, and up to 32 host computers can be connected.

13. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.