Support multiple high-speed pulse outputs

Support PWM/PTO output mode

Support motion axis group function, support 2D/3D linear interpolation motion

Multiple motion modes easily drive servo drives

Supports 10/100MBase/RS485 interfaces

Supports multiple bus protocols including S7/PROFINET/PPI/MPI/free programming

Product specifications:

Input voltage: 9~28 Vdc

Power consumption:<5W

Instantaneous current:<1A or less

Digital input: DI 12x24VDC

Digital output: DQ 8x24VDC

Anti interference performance: 1000Vp-p@2KHz

Insulation strength: 1000 Vac, 20 mA less than 1 minute (between power terminal and FG terminal)

Insulation resistance: 500 Vdc, above 10 M Ω

International Safety Standard CE

Working temperature: -10~60 ° C

Storage temperature: -20~+60 ° C

Working humidity: 10~90% RH (no condensation, wet bulb thermometer temperature: below 39 ° C)

Storage humidity: 10~90% RH (no condensation, wet bulb thermometer temperature: below 39 ° C)

Anti vibration performance: in accordance with IEC/EN61131-2 standard

5-9Hz single amplitude: 3.5mm

9~150Hz constant acceleration: 9.8m/s2

X. 10 times each for the Y and Z axes (100 minutes)

Impact resistance: Complies with IEC/EN61131-2 standard, 147m/s2, 3 times for X, Y, and Z axes each

Antistatic performance: Contact discharge ± 6kV

Non contact discharge: 8kV (compliant with IEC/EN61000-4-2, Level 3 standard)

Interface specification: 10/100MBase Ethernet

RS-485 1200~1Mbps

SD card interface: MMC2.0