ENET-MB-S features:

1. Installed on a 35mm rail, LAN is three RJ45 interfaces, with switch function, LAN is connected to PLC, touch screen and host computer; X1 and X2 are RS485 serial bus interfaces; WiFi external high-gain antenna, can be connected to the host computer; ENET external 24VDC power supply;

2. Integrated WEB server, through the web page can set equipment parameters and run diagnosis; It can also be configured via the BCDevice tool; It can be configured arbitrarily from LAN or WiFi;

3. Support two-way serial ModbusRTU master-slave communication, and can extend S7-1200, S7-1500, S7200 SMART and other network port PLCs to ModbusRTU serial bus, without PLC programming and GSD file import;

4. Support ModbusTCP server function, which can map the PLC connected to LAN to the ModbusTCP server with LAN/WiFi interface;

5. Support data exchange function, which can realize data exchange between Siemens network port PLC, data exchange between Siemens network port PLC and ModbusTCP equipment, and ModbusTCP instrument data reading, without PLC programming;

6. Support ENETS7 protocol server function, which can map the PLC connected to LAN to the ENETS7 protocol server of LAN/WiFi interface;

7. Integrated WiFi function, support AP mode, STA mode and AP STA mode;

8. PLC programming, data acquisition and data exchange can be carried out through WiFi;

9. Realize SmartIE series touch screen connection to S7-1200, S7-1500 and other PLCs;

10. The LAN/WiFi interface can support up to 32 upper computer access;

11. SCADA (upper-level configuration software) that supports OPC channel communicates with PLC in OPC mode;

12. Support the user side to realize firmware update through Ethernet, provide firmware that integrates more functions for free, purchase hardware once, and upgrade permanently.