ENET-CJ features:

1. Plug and play, the module is directly plugged into the DB9 of CJ1/CJ2/CS1/CG1/NX1P, no external power supply is required, and the expansion port can be connected to the touch screen at the same time.

2. Through the WEB server or the configuration diagnosis tool BCDevice, the device can be set parameters and run diagnostics.

3. Automatically identify the PLC model, automatically match the serial parameters of PLC and HMI, no additional configuration is required.

4. Realize Ethernet communication with Omron's programming software CX-Programmer.

5. Support FINS/UDP, FINS/TCP Ethernet protocol communication, and support host computer software (configuration king, MCGS, force control, KepWare OPC server, etc.) access.

6. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC15, FC6, FC16, Modbus data area is automatically mapped to PLC data area.

7. Support ENETTCP/IP transparent transmission protocol communication.

8. Using FINS communication protocol or transparent transmission, it can realize high-level language programming (such as VB, VC, C#, etc.), realize data communication with Omron PLC, and facilitate the development of production management system.

9. SCADA (superstructure software) that supports OPC channel communicates with PLC in OPC mode.

10. CX-Progarmmer, FINS/TCP, FINS/UDP, ENETTCP transparent transmission and ModbusTCP connection mode can be realized at the same time. Support the connection of 10 host computers.

11. Support the user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.